PRONEK

How much does home insulation cost in Quebec in 2026?

Most residential insulation projects in Quebec cost between $3,000 and $15,000 before taxes. Insulating only the attic often stays under $5,000, while insulating walls from the outside with new siding quickly goes beyond that. The type of insulation, access and air-sealing work make the biggest difference.

Quebec price ranges in 2026

Quebec market estimates, updated October 2026, before taxes (GST and QST extra). These are not guaranteed prices: costs vary by region, building and materials, and only a written quote based on your project gives an actual price.

Type of workPrice per sq ftTypical budget
Attic (blown cellulose or fibreglass)$1.50 – $3.50$2,000 – $5,000
Walls from the inside (spray polyurethane foam)$3 – $7$4,000 – $12,000
Basement / foundation walls$3 – $6$3,000 – $9,000
Exterior insulation (with new siding)$10 – $25$15,000+

What drives the price

  • Insulation type: blown cellulose costs far less per sq ft than spray foam, which insulates and seals in one step.
  • Removing old insulation (vermiculite, wet or contaminated batts) adds time and sometimes decontamination.
  • Air sealing and vapour barrier: sealing leaks around wires, ducts and hatches often brings more comfort than adding thickness.
  • Access: a low attic, a narrow hatch or finished walls increase labour.
  • Rénoclimat and LogisVert grants can lower the bill, but they require an EnerGuide evaluation before work begins.

Mistakes to avoid

  • Skipping air sealing: thick insulation still loses heat if warm air escapes through cracks.
  • Blocking attic ventilation (soffits, baffles): moisture builds up, followed by mould and ice dams.
  • Forgetting the EnerGuide evaluation before work: without it, most grants are refused.
  • Insulating a damp basement before fixing the water infiltration.

How to get reliable quotes

  • Ask for the target insulating value (R) for each surface, not just the thickness.
  • Have them state whether removing old insulation, sealing and ventilation baffles are included.
  • Check that the quote meets the requirements of the grant programs you are aiming for.
  • Check that the contractor holds a valid RBQ licence for this type of work in the Régie du bâtiment du Québec registry.
  • Insist on a detailed written quote and compare at least three quotes line by line, not just the total.

Estimate your budget, then get quotes

Use the PRONEK estimator to get a range for your project, then post your project for free: it is sent to verified RBQ contractors, and no payment is requested before signing.

Frequently asked questions

How much does it cost to insulate a 1,000 sq ft attic?

With blown cellulose, expect roughly $2,000 to $5,000 before taxes, depending on the target depth and removal of old insulation.

Which insulation grants exist in Quebec?

The Rénoclimat and LogisVert programs can help. An EnerGuide evaluation must be done before the work, then a second one after, to receive the funds.

Spray foam or batts: which should I choose?

Spray foam insulates and seals in one step, ideal for rim joists and foundation walls. Batts or cellulose cost less for large areas such as the attic.

How much can I save on heating?

It depends on the starting point. A poorly insulated, leaky house often sees a clear drop in its bill and far fewer drafts.

Other cost guides

Find an RBQ contractor near you